Pinnacle studio 10.5 question

Locked
User avatar
Ravensoldier22
Joined: Sun May 13, 2007 8:32 am
Location: Long Beach, California
Contact:
Org Profile

Pinnacle studio 10.5 question

Post by Ravensoldier22 » Mon Jul 09, 2007 11:47 pm

ok, well

I just got the program, and on the outside it looks like something I can use...

the thing is, on its minimum sys. requirements, I need 512 ram and I only have 256

should I go ahead and install anyways?
because I have nooo money for an upgrade as of now... :(

is it:

1. possible to run on 256
2. feasable to work with if it is possible

help?

User avatar
NS
I like pants
Joined: Sat Jul 08, 2006 10:05 pm
Status: Pants
Location: Minneapolis, Minnesota
Contact:
Org Profile

Post by NS » Mon Jul 09, 2007 11:57 pm

Most likely (like in most games) If you dumb down all the settings to as low as they go, you should be able to get by... But it'll still probably be laggy or choppy.

User avatar
BasharOfTheAges
Just zis guy, you know?
Joined: Tue Sep 14, 2004 11:32 pm
Status: Breathing
Location: Merrimack, NH
Org Profile

Post by BasharOfTheAges » Tue Jul 10, 2007 12:01 am

Try to install. Certain software won't let you install if you don't hit the minimum requirements, so you'll know off the bat.
Anime Boston Fan Creations Coordinator (2019-2023)
Anime Boston Fan Creations Staff (2016-2018)
Another Anime Convention AMV Contest Coordinator 2008-2016
| | |

User avatar
post-it
Joined: Wed Jul 17, 2002 5:21 am
Status: Hunting Tanks
Location: Chilliwack - Fishing
Org Profile

Post by post-it » Tue Jul 10, 2007 3:47 am

.. you might want to read these reviews .. before installing it!!! :shock: :shock: :shock:

http://www.videohelp.com/tools/Pinnacle_Studio

.. seem's there's a little bit of an install and running issue regardless of the Memory Size.

User avatar
Ravensoldier22
Joined: Sun May 13, 2007 8:32 am
Location: Long Beach, California
Contact:
Org Profile

Post by Ravensoldier22 » Tue Jul 10, 2007 10:29 pm

well, i didn't have any problems with install...looks like most of those reviews are for a different version than I have...which is 10.5

but i do need an upgrade now....won't let me run on my current ram, which I found out is now only 207...(is that normal?)

stupid memory requirements.... :cry:

User avatar
post-it
Joined: Wed Jul 17, 2002 5:21 am
Status: Hunting Tanks
Location: Chilliwack - Fishing
Org Profile

studio plus version 11 - out of the box and onto hard drive.

Post by post-it » Wed Jul 11, 2007 2:08 am

Ravensoldier22 wrote:... my current ram, which I found out is now only 207...(is that normal?)
.. if your computer was designed before 2003, it might show it as 207meg available ..
I have seen 128meg show as 119meg available on Compaq EVO-330's so it is possible!

After seeing your post and then seeing the Reviews, I purchased the Studio Plus version 11.

There are three versions of Pinnacle Studio with the AVID Video Editor:
1) 49.95 single layer editor which looks to be about as useful as a Ulead Studio!
2) 99.95 dual layer editor -- that's the one I purchased.
3) 129.95 dual layer editor with a green blanket >_< for self chroma keying back-drops.

Named:
1) Studio
2) Studio plus
3) Studio ultimate

#2 comes with three DVD's and an extensive list of options. The requirements are
listed as 1.6gig dual core AMD or Intel core2 duo 2.4gig processor, 2gig RAM with Vista or 512meg Windows XP SP2, 256meg ATI Radeon 9600+ or Nvidia GeForce 6 video card, a sound card.
.. the only thing it does not come with are:
1) Quicktime 7 or newer
2) Divx codec's
3) AVCHD codec's
4) Dolby 2.1 channel codec.
.. things you must supply are:
1) a DVD ripper
2) the 5.1, 6.1 and/or 9.1 channel audio codec's.

It is quite clear that Studio Plus / Pinnacle .. wants you to follow the MicroSoft way of doing things. They have gone out of their way to make the Editor eat-memory for proper usage!
After loading this DVD's onto the hard drive of both my computers,
a) Compaq EVO-330 ( 2.4gig proc, 512meg ram, 100gig PATA HD ) WinXP SP2
b) Gateway ( AMD 5000+ duo core 64bit, 4gig ram, three 320gig SATA hd's ) Vista basic 32bit
the first thing it tryed to do was get on the internet to be registered?? I told it NO and it shut-down the Studio Program from running on both XP and Vista! .. Clearly, this design is following the MicroSoft way of design -- to get on-line. I activated the XP computer ( which I am using right now ) and my hard-drive went NUTS!!! .. I only spent $125.00 for this silly thing so I wasn't worried if it blew-up or not ^_^
.. it turns-out that the activation erases about 90% of the three-DVD's install. I am using it right now with no crashes nor problems. As far as the Updates everyone was complaining about, well yea: if you want to do certain effects then you need purchase those updates -- daah!

So far, its only been five hours sence I activated it, I see no problems with anything but HD-Encoding ( 512meg just stutters while trying to play a clip while in the Editing mode. )

Encoding was slow for HD MODE, about three minutes per minute of Video Encoding - thats not too bad!

I have not played with it enough to write a review, but I see no real problems with 512meg ram, 2.4gig Intel Processor and the Pinnacle Studio Plus version 11 ^_^

well, if anything, I have to thank you. I like to find new software. I hope that my ranting-on-and-on about what I went through might help you in your quest for what updates shall be needed for the software you are getting ready to install ^_^

User avatar
Minion
Joined: Sat May 22, 2004 10:16 pm
Location: orlando
Contact:
Org Profile

Post by Minion » Wed Jul 11, 2007 7:04 am

pinnacle really dropped the ball on version 10.
i suggest an earlier version.
KioAtWork: I'm so bored. I don't have class again for another half hour.
Minion: masturbate into someones desk and giggle about it for the remaining 28 minutes

User avatar
Kionon
I ♥ the 80's
Joined: Fri Mar 02, 2001 10:13 pm
Status: Ayukawa MODoka.
Location: I wonder if you know how they live in Tokyo... DRIFT, DRIFT, DRIFT
Contact:
Org Profile

Post by Kionon » Wed Jul 11, 2007 10:00 am

Minion wrote:pinnacle really dropped the ball on version 10.
i suggest an earlier version.
I have 8. It is complete crap.
ImageImage
That YouTube Thing.

User avatar
Minion
Joined: Sat May 22, 2004 10:16 pm
Location: orlando
Contact:
Org Profile

Post by Minion » Wed Jul 11, 2007 10:59 am

before premiere, i used 7 and 9 :/ idunnolol

not bad as far as upgrading from WMM goes. as an overall editor though, it's pretty meh.
KioAtWork: I'm so bored. I don't have class again for another half hour.
Minion: masturbate into someones desk and giggle about it for the remaining 28 minutes

User avatar
Ravensoldier22
Joined: Sun May 13, 2007 8:32 am
Location: Long Beach, California
Contact:
Org Profile

Post by Ravensoldier22 » Wed Jul 11, 2007 10:39 pm

I really appreciate the input/help!

I'm really anxious to try and get into this program...wmv isn't cutting it anymore

I guess my first priority would be upgrading, since this computer is fitted with the bare minimum on most of everything (it cost me around 500 total) and compared to a lot of other people's machines, no where near video editing standards...

But my amv ambitions will not be shattered because of this...I guess it's time to start saving... :( :(

Locked

Return to “Video Editing Software”