Hey All,
I have this USB scanner that I've been switching back and forth between two computers. The question is: If I got a USB hub, would I be able to share the scanner between the two machines by hooking the scanner and two computers up to the hub? Or will that just not work?
Thanks in advance! ^_^
Phade.
USB hub question
- Phade
- Site Admin
- Joined: Fri Oct 20, 2000 10:49 pm
- Location: Little cabin in the woods...
- Mr Pilkington
- Joined: Tue Apr 09, 2002 4:10 pm
- Status: Stay outa my shed
- Location: Well, hey, you, you should stop being over there and be over here!
Never tried that, but I don't belive it'll work. You can, however get USB diplexor that will do what your looking for. Problem, they tend to look gawdy. It's just a little gray box, usually with an (A,B,C,D) switch on the front, but for a few buck more I'm sure you can get an automatic version. I don't know where they're sold, but pricewatch is always a good starting point. Never personally Had a USB Diplexor, but I used to have a bunch of Parallel Diplexors. Keyword(s)- Used to.
- FurryCurry
- Joined: Sun Jul 14, 2002 8:41 pm
- Mr Pilkington
- Joined: Tue Apr 09, 2002 4:10 pm
- Status: Stay outa my shed
- Location: Well, hey, you, you should stop being over there and be over here!
Here you go Phade! While I'm sure you can find it cheeper, but....
http://store.yahoo.com/pctekonline/usbsharsol.html
http://store.yahoo.com/pctekonline/usbsharsol.html
- madmallard
- Joined: Sat Aug 04, 2001 6:07 pm
- Status: Cracked up quacker, quacked up cracker
- Location: Atlanta, GA
- Contact:
-
- Joined: Wed May 16, 2001 11:20 pm