RAM delema

This forum is for help with and discussion about your video hardware.

RAM delema

Postby someperson » Sat Jan 29, 2005 2:04 pm

mmk. I'm in the process of getting a new desktop.
At this moment I'm debating whether I should go with 1GB Dual Channel DDR2 SDRAM at 533MHz (2x512M) or spend an extra $330 2GB Dual Channel DDR2 SDRAM at 533MHz (2x1GB).

The computer would have Pentium® 4 Processor 560 with HT Technology (3.60GHz, 800 FSB). So as far as video editing would go, would the 1 gig option suffice?
Your life is incomplete if you haven't read Blade of the Immortal
Ctr+ Alt+Del
Bubble wrap
User avatar
someperson
 
Joined: 04 Apr 2004
Location: Need to think of a new witty location

Postby RichLather » Sat Jan 29, 2005 9:22 pm

I'm editing with 1GB on a 2.4C GHz/HT and haven't noticed any problems with that amount.
User avatar
RichLather
 
Joined: 15 May 2001
Location: Lancaster, OH Position: One of the Elder Statesmen of the .org

Postby Jason 00 » Sun Jan 30, 2005 3:53 pm

if money is not an option then go for the 2GB, however 1GB should be enough RAM.
Dream as if you'll live Forever.
Live as if you'll die Tomorrow.
User avatar
Jason 00
 
Joined: 07 Dec 2002
Location: U.S.A

Postby BasharOfTheAges » Tue Feb 01, 2005 2:30 pm

As long as the Motherboard can supposrt extra RAM, you might be better off buying additional RAM elseware... somewhere like newegg.com or tigerdirect.com usually has better prices on RAM then the company you're buying the computer from, especially from companies like Dell, HP, etc.
Another Anime Convention AMV Contest Coordinator 2008-2014 & Head of the AAC Fan-works Theater - follow us on Twitter: https://twitter.com/#!/AACFanTheater
:sorcerer: :sorcerer: |RD: "Oh, Action!" (side-by-side) | |
User avatar
BasharOfTheAges
Just zis guy, you know?
 
Joined: 14 Sep 2004
Location: Merrimack, NH
Status: Extreeeeeeeeeme

Postby Xenocide270 » Thu Mar 24, 2005 7:12 pm

heh, i normally edit with premiere with only 512MB >.> it works fine for me.
but when the amount of RAM is in question the more the better!
User avatar
Xenocide270
 
Joined: 01 Feb 2005

Postby Brolly345 » Thu Mar 24, 2005 9:04 pm

I say spring for 2GB if you have the money to throw away. If not just stick with 1GB. I doubt you'll be needing 2GB for much of anything yet.
User avatar
Brolly345
 
Joined: 15 Sep 2003
Location: Huntsville, Alabama

Postby Guld_Bowman_02 » Fri Mar 25, 2005 9:41 am

I'd have to agree w/ everybody else. 512 in dual channel mode should be able to run in regular mode (depending on your MoBo) if you need the extra headroom for RAM. If you decide to take that option, there may be a slight performance loss b/c the ram is running in single channel mode instead of dual; but then again the 'extra' headroom may allow you somewhat compensate for the speed reduction. I am also in the process of building a very similar system, but with a P4 640 instead. If you decide to spend the extra $$ and go for the 2x1 Gig in dual channel, make sure that you get it from a reputable manufacturer. New Egg is a good place to start. I was out of the loop for a while but after a few weeks of scowering [url]hardforum.com[/url] (many sleepless nights) I was able to make a more informed decision on which MoBo, CPU, RAM, etc. I was going use to build my system; If you want to see what some of the 'big boys' use, this is a pretty good place to start, even if you aren't going to over clock your system...

that's just my .02 :)
Guld_Bowman_02
 
Joined: 08 Mar 2004
Location: Atlanta, GA

Postby Guld_Bowman_02 » Fri Mar 25, 2005 9:51 am

sorry about the bump...

one last thing, you may or may not already be aware of. If you get a Dell, Hp, etc. and are not going to buy your RAM from the company you purchaced the PC from, make sure that the RAM you get is compatable with your system, or you'r going to spend more time RMAing than editing vids. Or, just go with a good intel chipset MoBo (i915 for example) by Asus or even Intel, or some other good MoBo maker. Intel chipsets are pretty much the most trouble free (VIA, SiS, nForce) for editing systems.
Guld_Bowman_02
 
Joined: 08 Mar 2004
Location: Atlanta, GA

Postby mckeed » Fri Mar 25, 2005 5:51 pm

You shouldn't need any more than 512 for normal editing scenarios. Especially with the speed of the system you are talking about. Since most NLE's are more relient on hard drive speed and raw processing power. A gig of RAM should be nice though as it allows for better OS performance and for multitasking scenarios. If you bust into more high end stuff like after effects or combustion then you need more RAM as these programs typically render to RAM vs. rendering to disk like premiere does.
"People can not gain anything without putting forth any effort. That is the absolute Truth" - Dante, Full Metal Alchemist
Image
User avatar
mckeed
 
Joined: 15 May 2001
Location: Troy, NY


Return to Video Hardware Discussion

Who is online

Users browsing this forum: No registered users and 0 guests