How to convert MP4's with the new AMVapp 3.0 beta

This forum is for questions and discussion of all the aspects of handling your footage. If you have questions about capturing/ripping footage, AviSynth, or compression/encoding/converting, look here.

Re: How to convert MP4's with the new AMVapp 3.0 beta

Postby Mister Hatt » Tue Apr 27, 2010 5:11 am

Can you post your FULL avisynth script already? You're complaining about FFMS2 not working yet your screenshot clearly says DirectShitSource().
Mister Hatt
 
Joined: 25 Dec 2007
Status: better than you

Re: How to convert MP4's with the new AMVapp 3.0 beta

Postby Daniel_BMS » Tue Apr 27, 2010 8:30 am

Code: Select all
audiodub(ffvideosource("G:\ddrsbm_mybaby.mp4"),directshowsource("G:\ddrsbm_mybaby.mp4"))


Same 1 that was given to me in this thread.
Daniel_BMS
 
Joined: 26 Nov 2004

Re: How to convert MP4's with the new AMVapp 3.0 beta

Postby Qyot27 » Tue Apr 27, 2010 9:22 am

It's not working because DirectShowSource is still in there. As the name implies, DSS uses DirectShow to decode the files. If you don't have Haali's Media Splitter and a usable H.264 decoder (such as ffdshow, CoreAVC, or DivX 7) installed, you're SOL for using DirectShowSource, and it will error out every single time. That has nothing to do with FFMS2 working, though.
My profile on MyAnimeList | Quasistatic Regret: yeah, yeah, I finally got a blog
User avatar
Qyot27
Surreptitious fluffy bunny
 
Joined: 30 Aug 2002
Location: St. Pete, FL
Status: Creepin' between the bullfrogs

Re: How to convert MP4's with the new AMVapp 3.0 beta

Postby Mister Hatt » Tue Apr 27, 2010 9:26 am

We've been continually telling him to use FFMS2 though. Also, ffdshow isn't a decoder, libavcodec is what does it for ffdshow by default.
Mister Hatt
 
Joined: 25 Dec 2007
Status: better than you

Re: How to convert MP4's with the new AMVapp 3.0 beta

Postby Qyot27 » Tue Apr 27, 2010 10:06 am

I know libavcodec is the decoder (and true of ffdshow, FFmpegSource, VLC, and mplayer, and practically anything else that gets built against ffmpeg), but they're going to recognize 'ffdshow', whether they know that's incorrect or not.

My point was that the reason the script isn't working is because he isn't removing the DSS invocation, so even if FFMS2 is working fine, DSS is fucking it up. One wrong move in the script and the entire thing burns, but he's blaming it on the wrong part. The only two solutions are either A) take out the non-working bit, or B) make it stop throwing errors by installing the correct splitting and decoding filters.
My profile on MyAnimeList | Quasistatic Regret: yeah, yeah, I finally got a blog
User avatar
Qyot27
Surreptitious fluffy bunny
 
Joined: 30 Aug 2002
Location: St. Pete, FL
Status: Creepin' between the bullfrogs

Re: How to convert MP4's with the new AMVapp 3.0 beta

Postby Daniel_BMS » Tue Apr 27, 2010 3:54 pm

OK then how should my script look then? I made a few guesses, but all I got was an access violation error message.
Daniel_BMS
 
Joined: 26 Nov 2004

Re: How to convert MP4's with the new AMVapp 3.0 beta

Postby mirkosp » Tue Apr 27, 2010 4:59 pm

Code: Select all
audiodub(ffvideosource("G:\ddrsbm_mybaby.mp4"),ffaudiosource("G:\ddrsbm_mybaby.mp4"))

if it still gives errors for whatever reason, then do just
Code: Select all
ffvideosource("G:\ddrsbm_mybaby.mp4")

and deal with the audio in some other way.
Image
User avatar
mirkosp
MODkip
 
Joined: 24 Apr 2006
Location: Gallarate (VA), Italy
Status: (」・ワ・)」(⊃・ワ・)⊃

Re: How to convert MP4's with the new AMVapp 3.0 beta

Postby Mister Hatt » Tue Apr 27, 2010 9:32 pm

Audio in avisynth gives you cancer and sometimes aids.
Mister Hatt
 
Joined: 25 Dec 2007
Status: better than you

Re: How to convert MP4's with the new AMVapp 3.0 beta

Postby Daniel_BMS » Wed May 12, 2010 1:18 pm

Finally got a chance to try it. ffvideosource with ffaudiosource didn't work, but just ffvideosource works OK. Looks like I will stick with DVD Copy 6 for now. Thanks mirkosp though. I have saved the code for future reference.
Daniel_BMS
 
Joined: 26 Nov 2004

Previous

Return to Footage Help

Who is online

Users browsing this forum: No registered users and 0 guests