Kariudo wrote:the memory you chose isn't on Gigabyte's supported memory list so you may want to look at another brand.
Notice: Only DDR2-800 memory supporting JEDEC approved 1.8V operation with timings of 5-5-5 or 6-6-6 is supported on Intel Desktop Boards based on Intel 965 Express Chipsets.
jms wrote:Also, if your external HDD was pata, you might have to like put the dvd burner in the bottom 5.25 slot, or just get reallly long ide cables. Since you only have 1 pata slot (2 devices) one split wire will have to connect both.
Right, it's a usb enclosure, but the disk inside is PATA.Kariudo wrote:jms wrote:Also, if your external HDD was pata, you might have to like put the dvd burner in the bottom 5.25 slot, or just get reallly long ide cables. Since you only have 1 pata slot (2 devices) one split wire will have to connect both.
wha? usually external drives are connected via USB or firewire (but there are an increasing ammount of E-sata connections on these things)
Isn't PATA only for internal devices? (when I hear external, I think of a hard drive in an external closure instead of just a hard drive outside of the case)
Return to Video Hardware Discussion
Users browsing this forum: No registered users and 1 guest